With the right siding installation, you’re not just upgrading your home’s exterior; you’re investing in comfort, efficiency, and long-term savings. While vinyl siding is a popular choice due to its durability and low maintenance, it’s also renowned for its energy efficiency. In addition to insulation and weather resistance, insulated vinyl siding is sustainable to the environment. It can be recycled and made into other items made from plastic, keeping the old siding out of the landfills. As it is primarily made of salt, the manufacturing process efficiently has zero or no waste as scraps go back into the product stream.
- Jan has a Golden Rule for vinyl siding installation, “Always manage the movement of the product.” All polymer products expand in the heat and contract in the cold.
- Then do the sides ensuring to overlap them with the bottom piece.
- When joining two lengths of siding, lap one length over the other approximately 1 inch.
- The installation clips (AW08) are made of aluminum and serve to attach each board to the joists and allow air to circulate under the siding.
- It’s available in an impressive palette of sun-resistant shades.
- First, measure a side of your door or window and add a half inch, mark that extra half inch and leave it for now.
- When it’s time for new siding, reach out to the professionals at 2FL Windows, Siding and Roofing.
- Ensure you slide the panel into the j-channel if you have a door, window, or a corner you are siding into.
Installing the Starter Strip and Corner Posts
Thermal bridging is the process of energy moving through or across an object that is more conductive than the materials that surround it. The conductive material—metal and wood—allow the heat to pass right through. You might wonder how studs could possibly allow so much energy loss in a home.
- Finalizing your project at the rooflines requires a little extra work.
- Put the next siding piece up on the wall and into the j-channel if able.
- The top piece must overlap the bottom so that water flows down it without getting in the crack.
- Vinyl siding expands and contracts in reaction to temperature, so vinyl siding installers will need to cut the panels as necessary to work with growth and shrinkage.
- After this acclimation period size changes will be seasonal and minimal.
- If your home has a deck, it’s likely to be suspended from a wall and covering the bottom of the existing siding.
- Side A and B are both the same width as the siding boards that we provide, but Side C is twice the width of the boards, meaning that I Trim (US45) will be installed on that side.
- You’ll use J-channel around windows and doors to help it receive siding.
Experienced vinyl siding installers know that the nail should never be tight against the nailing fin. This is because the head of the nail needs about 1/16” space between the nailing fin. Carefully measure, mark your cuts, and trim the siding to fit snugly around these openings.
- Begin fastening in the center of the panel and work your way toward the ends, making sure the panels are securely locked along the length of the bottom.
- And buckling, warping and ripples in siding can indicate improper installation and growing water damage behind the cladding.
- If dumped in a landfill, plastic siding does not break down quickly.
- Maintaining original materials or using period-appropriate alternatives may be more valuable in such areas, so consider your neighborhood before installing vinyl.
- Proper nail placement and utility trim installation will allow for the natural movement of the siding with changes in temperature, reducing the risk of warping or buckling.
- Thatch is an ancient and very widespread building material used on roofs and walls.
- We are trained to work in ALL weather and understand your concerns; hence, we enhanced our Winter Worry-Free Installation Program.
- Installing this trim will ensure water runs away from your windows correctly and prevent it from getting under the sill.
Our Products
You can see how this is accomplished in the installation video below. Like most siding, you will install the fiber cement boards from the bottom up when using a traditional, horizontal lap application. You will begin with a starter strip with weep holes that will allow moisture to readily escape. You will need a clearance from the grade that either follows installation instructions or local building codes (whichever is greater). Then, you would install your fiber cement corner and window trim.
Is installing siding difficult?
Then install a 9-inch-wide horizontal sill that is level with the window’s bottom edge. Press the flashing into the bead of sealant firmly to get a good seal. Costs of composites tend to be lower than wood options, but vary widely as do installation, maintenance and repair requirements.
Attaching Siding Panels
As a homeowner, it is essential to think about the impact that your home improvement project will have on the environment. Our company has been green for a long time — and long before it was fashionable. Cor-a-vent Sturdi-Batten, or similar pre-made furring strips which allow water to drain through the strips. Install the strips horizontally, again with 12″ of space in between them. For Accoya® products please refer to their installation guide at accoya.com.
Vinyl siding has become one of the hottest materials in the architectural world.
To buy a copy of our comprehensive guide on how to install vinyl siding, visit our online bookstore. Helpful materials on architectural design and more are also available for purchase. Properly cut and fitted gable siding will ensure a polished and professional look for your home’s exterior. By following these steps, you can ensure a proper and secure installation of the corner post. Proper installation of soffits and fascia covers not only enhances the appearance of your home but also helps protect it from water damage. Now that your materials are in place, you can install the J-channel around your doors, windows, and soffits.
Overlapping Siding Panels
A clean surface is the first step to a lasting installation. In carpentry, they say “measure twice, cut once.” The same idiom applies here. Good preparation will save you time and money, so make sure your surface is even and clean. NewTechWood has been a leader in composite siding, decking and railings ever since our beginnings in 2004. We have gained a reputation worldwide for making cutting-edge, beautiful and reliable products.
Avoid Thinner Starter Strips
One of the greatest benefits of NewTechWood’s siding products is its UltraShield technology. This new feature has truly revolutionized the industry of composite boards with its multitude of benefits. We have lots of great Hardie® Plank lap siding installation tips that will help you with your project. Be sure to install the furring strips using screws that go through the sheathing and into the wall studs when possible. We recommend a No. 8 flat-head wood screw, 1-1/2” long, 316 Stainless Steel, with an auger point.
How To Install Head/Jamb Trim On A Doorway
- And there’s a powerful cost incentive to handle an installation yourself.
- Once your installation is scheduled, your siding contractor will order materials, as well as a dumpster to cart away debris.
- Also, it is important to remember not to leave stacks of siding horizontal and exposed.
- Ensure joints meet on studs, blocking or furring strips with the nail penetrating solid wood at least 1-1/4 inches.
- The space will allow them to expand and contract without any problems.
If you’re not sure what type or style of siding you need, schedule a free siding consultation with our team. In addition to reducing energy consumption, insulated siding is a durable exterior product, designed to last more than 50 years, according to manufacturers. The foam provides rigidity for a more ding- and wind-resistant siding, maintaining a quality look for the life of the products. The foam backing also creates straighter lines when hung, providing a look more like that of wood siding, while remaining low maintenance.
Install the Siding Panels
Furring should be installed around windows and other breaks in the siding to allow for attaching the ends or edges of the siding. Make sure there are breaks in the furring strips that will allow venting around the window or other opening. We hope this guide gave you the confidence and clarity to tackle your vinyl siding project. But if you’re thinking twice—or just want it done right the first time—ARCH Exteriors is here to help. Vinyl siding isn’t just a matter of hammer and nails—there are specific installation techniques you’ll need to follow to avoid warping, cracking, and water damage down the road.
- A smooth, level wall surface is necessary for the accurate installation of vinyl siding.
- Now for the best part of the installation process — installing your steel log siding!
- This resilience translates to less time and money spent on maintenance.
- Measure the top siding installation panel and cut it to fit.
- To install vinyl siding, start by nailing J-channel pieces under the fascia, followed by installing soffit pieces and the starter strip.
- Sealing and caulking are essential for preventing water infiltration and ensuring a clean finish.
Enhance Your Home’s Curb Appeal With Custom Siding Replacement Options
Our experienced siding contractors can help further explain the warranty process when you contact us. That enhances the weather resistant barrier system by reducing the amount of water that reaches the underlying weather resistant barrier. When looking at the overlap between pieces, work to stagger those overlaps vertically so that all your seams are not in the same place on the wall to make it more visually attractive. When selecting where to overlap your pieces, try to keep them away from entryways and places of visual interest to keep the home attractive.
Use nails, staples or screws that are corrosion resistant when fastening vinyl siding to a wall. If you’re attaching aluminum trim pieces, be sure to use aluminum or stainless steel fasteners. Begin fastening in the center of the panel and work your way toward the ends, making sure the panels are securely locked along the length of the bottom. When you’ve determined the best height for the metal starter strip, mark this position on the walls and snap a reference chalkline around the entire house. Then, nail a 3 1/2-inch strip of 1/2-inch plywood above this line to hold out the bottom of the first row of siding, and nail the starter strip to this plywood.
Securing Fascia Installation
Composite sidings are available in many styles and can mimic the other siding options. Ants and termites are a threat to many types of wood siding, such that extra treatment and maintenance that can significantly increase the cost in some pest-infested areas. Vinyl siding quotes may vary due to the amount of current exterior that needs removed, underlying damage to current exterior, the quality of the siding panels, and more.
The toughness of fiber cement siding calls for tougher tools. The cutting of fiber cement boards for corners and proper lengths requires tougher saws and tools than siding made of vinyl or wood. Initiating the process with starter strips and flashing is a primary step in vinyl siding installation. Ensuring a solid foundation will help guarantee a smooth and long-lasting installation that protects your home from the elements. Vinyl siding is relatively easy to install, but it does require skill. It’s best to hire a professional who has the tools and experience required to execute the project effectively.
Installing Siding on Your Home
Tackling how to install siding on a house may seem like a HUGE task at first, but once you break down this transformative project, it can be quite doable … and dare I say enjoyable? Just follow our vinyl siding installation tips and you’ll be golden. Shake and Shingle are trending siding options for gables, and we know it can be tricky to transition to them from horizontal vinyl siding. To begin, you must terminate the vinyl siding and begin again with the shake. The vinyl siding and shake siding will not lock directly together. The easiest method is to terminate the vinyl siding in the same way as you would normally with a j-channel.
Choosing the right vinyl siding that fits your home’s aesthetic and your budget from the start is key. What most people don’t know, but you will soon, is that this project can seem daunting, but is actually pretty simple. Whether you’re starting from scratch or replacing old siding, the journey boils down to a step-by-step process that’s completely doable, even for beginners. While vinyl siding is low-maintenance, some care is required to keep it looking its best and functioning properly.
If the panels are installed horizontally, then it will require foam closure strips. As long as you’ve done your due diligence with research and preparation, your vinyl siding installation should sail smoothly. You should end up with a flawless finish with the insider tips in this guide. Now, if you think you’re way over your head and are looking for professional help, don’t hesitate to get in touch with Heritage Exteriors today. Our team is ready to answer all your questions and offer you a free estimate for any of our services.
Insert the vinyl soffit panels into the channels, starting from one end and working your way across. Ensure the soffit panels are securely seated in the J-channels, but allow for some movement to accommodate expansion and contraction. Be cautious of any loose boards that may cause instability during the installation process. If you’ve handled your starter strip and corner posts well, this should be an easy part of the process. Find the center Siding replacement of your nailing slot, then hammer your panels in, leaving a small gap to allow your siding to expand and contract with the weather. For horizontal applications, start with the bottom course and work up with the channels pointing upwards.
